Cablenet Cat6a RJ45 FTP Field Termination Plug with Blue Latch

22-2095

22-2203

22-2202

22-2103

22-2200

1 piece RJ45 Crimp Plug for solid Cat5e UTP cable

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme
1 - White/Orange (Transmit +)
2 - Orange (Transmit -)
3 - White/Green (Receive +)
4 - Blue
5 - White/Blue
6 - Green (Receive -)
7 - White/Brown
8 - Brown

T-568A
1 - White/Green (Receive +)
2 - Green (Receive -)
3 - White/Orange (Transmit +)
4 - Blue
5 - White/Blue
6 - Orange (Transmit -)
7 - White/Brown
8 - Brown

Possibly the simplest Cat5e RJ45 Termination ever created.

Insert wires all the way through the connector.
Simple one-piece design, no loading bars or liners.
Check cables in correct order.
Simply pull the connector down over the cable jacket.
Trim the cables and crimp the connector in one step with the EZ Easy Plug Crimping Tool.
Make quicker terminations and reduce waste.
Suitable for stranded or solid cable (23-26 AWG).

Cable Stripper, Crimping Tool & Boots sold separately

Convenient Carry Case is also available

These field termination plugs are manufactured with a fully shielded die-cast zinc alloy, nickel plated body and gold plated phosphor bronze contact pins.Suitable for cable diameters between 6.00mm and 7.5mm, Cable retention and strain relief is provided by the compression nut on the rear of the connector. IDC termination accepts wire gauges from 23 to 26AWG stranded or solid wire.

Termination is performed using the dedicated Crimping Tool for Cat6a Field Termination Plug.

1 piece RJ45 Crimp Plug for stranded Cat5e UTP cable

RJ45 is a type of connector commonly used for Ethernet networking. RJ45 connectors are used for connecting Ethernet cables to equipment in computer networking applications such as telecommunications or data equipment.

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme
1 - White/Orange (Transmit +)
2 - Orange (Transmit -)
3 - White/Green (Receive +)
4 - Blue
5 - White/Blue
6 - Green (Receive -)
7 - White/Brown
8 - Brown

T-568A
1 - White/Green (Receive +)
2 - Green (Receive -)
3 - White/Orange (Transmit +)
4 - Blue
5 - White/Blue
6 - Orange (Transmit -)
7 - White/Brown
8 - Brown

These field termination plugs are manufactured with a fully shielded die-cast zinc alloy, nickel plated body and gold plated phosphor bronze contact pins.Suitable for cable diameters between 6.00mm and 7.5mm, Cable retention and strain relief is provided by the compression nut on the rear of the connector. IDC termination accepts wire gauges from 23 to 26AWG stranded or solid wire.

Termination is performed using the dedicated Crimping Tool for Cat6a Field Termination Plug.

U/UTP, RJ-45, Cat5e

Cat5e - RJ45 UTP EZ Easy Plug

Cat6a RJ45 FTP Field Termination Plug With White Latch

RJ-45, Stranded, Cat5e, UTP

Cat6a RJ45 FTP Field Termination Plug with Black Latch

Cablenet

Cablenet

Cablenet

Cablenet

Cablenet