Cablenet Cat5e RJ45 UTP Round Crimp Plug Solid

22-2203

22-2100A

22-2202

22-2204

22-2201

Possibly the simplest Cat5e RJ45 Termination ever created.

Insert wires all the way through the connector.
Simple one-piece design, no loading bars or liners.
Check cables in correct order.
Simply pull the connector down over the cable jacket.
Trim the cables and crimp the connector in one step with the EZ Easy Plug Crimping Tool.
Make quicker terminations and reduce waste.
Suitable for stranded or solid cable (23-26 AWG).

Cable Stripper, Crimping Tool & Boots sold separately

Convenient Carry Case is also available

2 piece RJ45 Crimp Plug for stranded Cat6 UTP cable

RJ45 cables can be terminated in two different ways as defined in TIA/EIA-568. One version is called T-568A and the other is T-568B.
Both wiring standards are listed below

T-568B - Most common wiring scheme
1 - White/Orange (Transmit +)
2 - Orange (Transmit -)
3 - White/Green (Receive +)
4 - Blue
5 - White/Blue
6 - Green (Receive -)
7 - White/Brown
8 - Brown

T-568A
1 - White/Green (Receive +)
2 - Green (Receive -)
3 - White/Orange (Transmit +)
4 - Blue
5 - White/Blue
6 - Orange (Transmit -)
7 - White/Brown
8 - Brown

These field termination plugs are manufactured with a fully shielded die-cast zinc alloy, nickel plated body and gold plated phosphor bronze contact pins.Suitable for cable diameters between 6.00mm and 7.5mm, Cable retention and strain relief is provided by the compression nut on the rear of the connector. IDC termination accepts wire gauges from 23 to 26AWG stranded or solid wire.

Termination is performed using the dedicated Crimping Tool for Cat6a Field Termination Plug.

Possibly the simplest Cat5e RJ45 Termination ever created.

Insert wires all the way through the connector.
Simple one-piece design, no loading bars or liners.
Check cables in correct order.
Simply pull the connector down over the cable jacket.
Trim the cables and crimp the connector in one step with the EZ Easy Plug Crimping Tool.
Make quicker terminations and reduce waste.
Suitable for stranded or solid cable (23-26 AWG).

Cable Stripper, Crimping Tool & Boots sold separately

Convenient Carry Case is also available

These field termination plugs are manufactured with a fully shielded die-cast zinc alloy, nickel plated body and gold plated phosphor bronze contact pins.Suitable for cable diameters between 6.00mm and 7.5mm, Cable retention and strain relief is provided by the compression nut on the rear of the connector. IDC termination accepts wire gauges from 23 to 26AWG stranded or solid wire.

Termination is performed using the dedicated Crimping Tool for Cat6a Field Termination Plug.

Cat5e - RJ45 UTP EZ Easy Plug

RJ45, Cat6, U/UTP

Cat6a RJ45 FTP Field Termination Plug With White Latch

Cat5e - RJ45 FTP EZ Easy Plug

Cat6a RJ45 FTP Field Termination Plug with Blue Latch

Cablenet

Cablenet

Cablenet

Cablenet

Cablenet