BenQ CM00G3 project mount Ceiling Black, Stainless steel

OCM815B

TM-1200

TM-TELE

TM-ST2

OCM818B-RU

The OCM815B Black Universal Projector Pole Mount is ideal for high ceilings. Easy to set up with its unique design gives you everything you need for quick adjustment, the flexibility to fit almost any projector and hassle free projector maintenance. It’s the perfect universal projector pole mount.

The Techmount is a universal projector ceiling bracket designed to secure most video data projectors safety and sturdily to your ceiling. We only have one projector ceiling bracket in our range: it comes with a 1.1m pole and it is designed to be useful in 99% of installations. That means built in flexibility allowing quick assembly in a number of different configurations, including "flush-mount" where the projector is as close to the ceiling as possible. We believe the fixed pole style we use is the best for rigidity, and because you cut it to length onsite, it has an infinitely variable length. Safety Approved We believe it is good practise to use a safety fall-arrest tether which secures the projector to your bracket, so we've included one. 20kg SWL Independent testing on calibrated hydraulic test equipment has shown a breaking-strain of half a ton! We recommend a maximum safe working load of 20kg which is well within it's limits. Obstruction-free Cable Management Rather than having a long bolt that runs through the pipe and blocks cable access, we use our unique quad-bolt Chute-through system which leaves cable access clear - even for a big VGA connector. Secure We believe quick-release mechanisms make life easier for thieves, so our mount is secure and features security bolts. Sloping Ceilings? If you have a sloping ceiling there is a tilting mechanism included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be. Tools Included A spanner and pin-hex key are included. The only tool you'll need is a 2" pipe cutter (NOT INCLUDED - ask your hardware supplier for a pipe cutter with a 6-67mm range, and a metal cutting disk). With this tool you'll cut the pole like a knife through butter. We've also included a drilling jig so you can easily and accurately drill 9mm holes into the pole. Easy fit Fitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. But because not all use the same diameter screws we provide a selection of screws to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes, and insert a screw into the projector. Finish the job properly! TM-1200 Trim Disk Aesthetics are also enhanced by our exclusive retrofittable trim disk which is fitted to the pole in false-ceiling environments to properly finish the installation.

- Universal projector ceiling mount with telescopic pole
- Overall length 440-735 mm
- Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom

The TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for “flush-mounting” the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended.

One-Man Installation
Thoughtful design detail include a length adjustment clamp system which requires only one hand.

Sloping Ceilings
A tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.

Safety Approved
A back-up fall-arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009).

Easy fit
Projectors have threaded inserts in the bottom for attachment – but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the “spider” arms on our bracket over the attachment holes, and insert a screw into the projector.

Obstruction-free Cable Management
Vision’s unique ‘chute-through’ system leaves cable access clear – even for big VGA connectors.

Tools Included
A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation.

Secure
Quick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts.

- Telescopic boom 930-1530mm (centre-of-projector to wall)
- Projector can be mounted at any point along boom
- Adjustable boom slope

Key Features

- Easy to install – Great flexibility and adaptability
- Quick projector reconnect/disconnect
- +/- 30° rotation
- 70mm horizontal shift
- +/- 20° pitch and roll
- Adaptable to different projectors
- Load capacity 15kg

The OCM818 Universal Projector Flush Mount is suitable for installation in the office or at home. Its unique low-profile design gives you everything you need for quick adjustment and the flexibility to fit almost any projector. Easy to set up and available in black or white it’s the perfect universal projector flush mount.

Ceiling Pole Mount, Capacity 15kg, +/- 30° Rotation, +/-20° Pitch/Roll, Black

TM-1200

TM-TELE, 440-735 mm

TM-ST2 Short-Throw Projector Wall Mount

161 x 100 x 121 mm, 1.2 kg

Optoma

Vision

Vision

Vision

Optoma