Manhattan Projector Mount, Ceiling, Universal, Full Motion, Height Range: 745 to 1145mm, Max 35kg, White, 360° rotation, +/-20° Tilt, and +/-8° Swivel, Lifetime Warranty

OCM815B

TM-TELE

OCM818B-RU

CPAE100

5A.JHS10.002

The OCM815B Black Universal Projector Pole Mount is ideal for high ceilings. Easy to set up with its unique design gives you everything you need for quick adjustment, the flexibility to fit almost any projector and hassle free projector maintenance. It’s the perfect universal projector pole mount.

- Universal projector ceiling mount with telescopic pole
- Overall length 440-735 mm
- Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom

The TM-TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for “flush-mounting” the projector as close to the ceiling as possible. Note: unlike the TM-1200 the length of this bracket cannot be extended.

One-Man Installation
Thoughtful design detail include a length adjustment clamp system which requires only one hand.

Sloping Ceilings
A tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be.

Safety Approved
A back-up fall-arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009).

Easy fit
Projectors have threaded inserts in the bottom for attachment – but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the “spider” arms on our bracket over the attachment holes, and insert a screw into the projector.

Obstruction-free Cable Management
Vision’s unique ‘chute-through’ system leaves cable access clear – even for big VGA connectors.

Tools Included
A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation.

Secure
Quick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts.

Key Features

- Easy to install – Great flexibility and adaptability
- Quick projector reconnect/disconnect
- +/- 30° rotation
- 70mm horizontal shift
- +/- 20° pitch and roll
- Adaptable to different projectors
- Load capacity 15kg

The OCM818 Universal Projector Flush Mount is suitable for installation in the office or at home. Its unique low-profile design gives you everything you need for quick adjustment and the flexibility to fit almost any projector. Easy to set up and available in black or white it’s the perfect universal projector flush mount.

CPAE columns were designed specifically for use in Europe, the Middle East and Africa and are only available in those regions.

CPAE columns feature convenient pin-connections for a fast installation and a quick service external cable management.

No

Ceiling Pole Mount, Capacity 15kg, +/- 30° Rotation, +/-20° Pitch/Roll, Black

TM-TELE, 440-735 mm

161 x 100 x 121 mm, 1.2 kg

Pin Connection Column 100 cm

Universal Ceiling Mount G4 for P Series

Optoma

Vision

Optoma

Chief

Benq