We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
>
PLANET FT802S15 network media converter 100 Mbit/s 1310 nm Single-mode Black
SKU
FT802S15
Login for pricing
In Stock:
18 available
10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter, 15km
- Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
- Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, connector type and distance vary with model
- FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
- FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
- Duplex mode support:
- Full or half-duplex mode by auto-negotiation (TP)
- Full or half-duplex mode by DIP switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP switch: 2 DIP switches
- Rear DIP switch: FX duplex mode selection
- Side DIP switch: LFP (Link Fault Pass-through) mode selection
- IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets
Category: Network Media Converters
| SKU | FT802S15 |
|---|---|
| EAN | 4711213680540 |
| Manufacturer | Planet |
| Availability | In Stock |
PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available. The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function. LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.
| Network | |
|---|---|
| Fiber optic connector | SC |
| Auto-negotiation | Yes |
| Link Loss Carry Forward (LLCF) supported | Yes |
| Link Loss Return (LLR) supported | Yes |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX |
| Fiber ethernet cabling technology | 100BASE-FX |
| Converter input interface | 100Base-TX |
| Networking standards | IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10,100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Duplex system | Full, Half |
| Converter output interface | 100Base-FX |
| Auto MDI/MDI-X | Yes |
| Maximum data transfer rate | 100 Mbit/s |
| Technical details | |
| Housing material | Metal |
| Wavelength | 1310 nm |
| Maximum transfer distance | 15000 m |
| Fiber mode structure | Single-mode |
| Fiber cable diameters supported (core/cladding) | 9/125 µm |
| Sensitivity | -32 dBmW |
| Tx power (min) | -20 dBmW |
| Internal | No |
| Harmonized System (HS) code | 85176990 |
| Performance | |
| Auto-negotiation | Yes |
| Wavelength | 1310 nm |
| Maximum transfer distance | 15000 m |
| Fiber mode structure | Single-mode |
| Fiber cable diameters supported (core/cladding) | 9/125 µm |
| Sensitivity | -32 dBmW |
| Tx power (min) | -20 dBmW |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Fiber ports quantity | 1 |
| Fiber optic connector | SC |
| DC-in jack | Yes |
| Indication | |
| LED indicators | Yes |
| Design | |
|---|---|
| Housing material | Metal |
| LED indicators | Yes |
| Product colour | Black |
| Certification | FCC Class A, CE Class A |
| Internal | No |
| Power | |
| Input voltage | 100 - 240 V |
| Output voltage | 5 V |
| Output current | 2 A |
| External power adapter | Yes |
| AC input frequency | 50 - 60 Hz |
| Colour | |
| Product colour | Black |
| Weight & dimensions | |
| Width | 97 mm |
| Depth | 70 mm |
| Weight | 200 g |
| Height | 26 mm |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating relative humidity (H-H) | 5 - 90% |
| Storage relative humidity (H-H) | 5 - 90% |
| Certificates | |
| Certification | FCC Class A, CE Class A |
You may also be interested in
| Product |
Hot Product
PLANET FT802S15 network media converte...
Login for pricing
|
Popular
Cisco MGBT1 SFP Transceiver | Gigabit...
Login for pricing
|
Bestseller
Cisco MGBSX1 SFP Transceiver | Gigabit...
Login for pricing
|
StarTech.com 10/100 Ethernet to Multi...
Login for pricing
|
Recommended
StarTech.com 10/100 Multi Mode Fiber C...
Login for pricing
|
New
Allied Telesis AT-SPEX network media c...
Login for pricing
|
|---|---|---|---|---|---|---|
| SKU |
FT802S15
|
MGBT1
|
MGBSX1
|
MCM110SC2GB
|
MCM110ST2GB
|
AT-SPEX
|
| Description |
PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available. The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function. LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.
|
The Cisco MGBT1 Transceiver MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) is an easy-to-install module that provides a simple way to add fiber connectivity to Cisco 100, 200, 300, and 500 Series switches.
The MGBT1 transceiver is available for single-mode or multimode fiber-optic cabling and can support distances up to 100 meters. |
The Cisco MGBSX1 Transceiver MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) is an easy-to-install module that provides a simple way to add fiber connectivity to Cisco 100, 200, 300, and 500 Series switches.
The MGBSX1 transceiver is available for single-mode or multimode fiber-optic cabling and can support distances from 100 meters up to 500 meters. |
This Ethernet to MM Fiber Media Converter creates an economical, cost-effective Ethernet-fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber, while delivering solid network performance and scalability.
|
Convert and extend a 10/100 Mbps Ethernet connection up to 2 km over Multi Mode ST fiber
This Ethernet to MM Fiber Media Converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance and scalability. Easy to setup and install, this compact, value-conscious media converter features auto-switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full and Half Duplex, as well as LFP (Link Fault pass-through) on/off. The StarTech.com Advantage |
The AT-SPEX offers a 2 km over multi-mode fiber (1310 nm) option to extend your network. The AT-SPEX is compatible with all the Allied Telesis range of products which have an SFP port.
|
| Short Description |
10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter, 15km
|
MGBT1 SFP Transceiver | Gigabit Ethernet (GbE) 1000BASE-T Mini-GBIC (MGBT1)
|
MGBSX1 SFP Transceiver | Gigabit Ethernet (GbE) 1000BASE-SX Mini-GBIC (MGBSX1)
|
Ethernet Fiber Media Converter
|
StarTech.com 10/100 Multi Mode Fiber Copper Fast Ethernet Media Converter ST 2 km - UTP to 100Base-Fx - Fiber Optic Media Converter MM (MCM110ST2GB)
|
SFP Pluggable Optical Module, 1000LX, 2km, Multi mode, Dual fiber [Tx=1310,Rx=1310], LC conn. (0 to 70°C)
|
| Manufacturer |
Planet
|
Cisco
|
Cisco
|
StarTech.com
|
StarTech.com
|
Allied Telesis
|