Motorola CHG-AUTO-CLA1-01 power cable Black

AP9876

AP8755

CAB-C13-CBN=

AP8758

AP8760

No

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method While these cords will fit into any standard IEC receptacle or power inlet; the locking feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads

Different Modules require different amount of power. Inline Power modules supplies the power to the IP phones. Cisco has inline power module to power the IP phones. You have to choose the correct power supply in order to support the various line cards, modules and Supervisor Engines on the switch. Cisco offers a tool called the Cisco Power calculator which can be used in order to choose the correct power supply for your switch. Launch the Cisco Power calculator and fill out the Product family, Supervisor Engine, Input voltage, line cards and the number of PoE devices. IP phones are the example for PoE devices and most of the IP phones belong to IEEE 802.3af Device - Class 2 (7W). Then the power calculator shows the results of different choices of Power Supplies. From that you can choose the required power supply. The power supplies successfully operate at their greatest capacity if the input voltage is between 200 and 240 volts AC.

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method While these cords will fit into any standard IEC receptacle or power inlet; the locking feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads

C19/IEC309, 90-250V, 16A, 2.5m

Power Cord, Locking C19 to CEE/7 Schuko, 3.0m

Cabinet Jumper Power Cord, 250 VAC 16A, C14-C13 Connectors, Spare

Power Cord, Locking C19 to IEC309-16A, 3.0m

Power Cord, Locking C19 to C20, 3.0m

APC

APC

Cisco

APC

APC