We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
CyberPower PR3000ERT2U uninterruptible power supply (UPS) Line-Interactive 3 kVA 3000 W 8 AC outlet(s)
SKU
PR3000ERT2U
Login for pricing
Out Of Stock - Contact for availability
PR3000ERT2U, 3000 VA, 3000 W, 159-288 VAC, 50/60 Hz, IEC C20, 6x IEC C13, 2x IEC C19, RJ-45, RS-232, USB, 433x86.5x500 mm
- Line-interactive UPS Topology
- Energy Saving Technology
- Active PFC Compatible
- Pure Sine Wave Output
- Night Mode Design
- Tool-less Battery Replacement
- Battery Management Technology
- High Output Power Factor
- Automatic Voltage Regulation (AVR)
- Overload Protection
Category: Uninterruptible Power Supplies (UPSs)
Output power capacity | 3 kVA |
---|---|
Product colour | Black |
Output power | 3000 W |
Form factor | Rackmount/Tower |
SKU | PR3000ERT2U |
EAN | 4712856277562 |
Manufacturer | CyberPower |
Availability | In Stock |
Product Manuals (HTML) |
View Manual View Manual View Manual |
PDF URLs |
View PDF View PDF |
CyberPower PR3000ERT2U Line-Interactive UPS, with seamless Pure Sine Wave, provides the best power protection available for office system devices including PCs, workstations, networking devices, and peripherals. It’s typically integrated in the back office, server room, and data center environment. The rackmount / tower convertible design gives it enhanced flexibility for installation and operation in almost any environment.
Multiple UPS systems can be connected to a single main Emergency Power Off (EPO) switch. In the event of an emergency, the UPS systems can be shut down immediately with the EPO button. As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption.
Multiple UPS systems can be connected to a single main Emergency Power Off (EPO) switch. In the event of an emergency, the UPS systems can be shut down immediately with the EPO button. As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption.
Power | |
---|---|
Output power | 3000 W |
Input operation voltage (min) | 159 V |
Input operation voltage (max) | 288 V |
Output operation voltage (min) | 220 V |
Output operation voltage (max) | 240 V |
Surge energy rating | 2430 J |
Maximum current | 10 A |
Emergency Power Off (EPO) | Yes |
Power factor | 1 |
Output power capacity | 3 kVA |
Power Factor Correction (PFC) type | Active |
Ports & interfaces | |
Cable length | 2.4 m |
Emergency Power Off (EPO) connector | Yes |
USB port | Yes |
Serial interface | Yes |
Serial interface type | RS-232 |
AC outlets quantity | 8 AC outlet(s) |
AC outlet types | C13 coupler, C19 coupler |
Power plug | C20 coupler |
Serial ports quantity | 1 |
RS-232 ports | 1 |
Ethernet LAN (RJ-45) ports | 2 |
Battery | |
Battery type | RBP0129 |
Number of batteries supported | 1 |
Battery technology | Sealed Lead Acid (VRLA) |
Battery recharge time | 3 h |
Typical backup time at half load | 6.4 min |
Typical backup time at full load | 1.3 min |
Hot-swap battery | Yes |
Performance | |
Audible alarm modes | Alarm when on battery, Fault, Low battery alarm, Overload alarm |
UPS topology | Line-Interactive |
Waveform | Pure sine |
Automatic Voltage Regulation (AVR) | Yes |
Number of output phases | 1 |
Number of input phases | 1 |
Response time | 4 ms |
LED indicators | Fault, Power, Status |
EMI/RFI noise filtering | Yes |
Surge protection | Yes |
Surge protection features | Network |
Power protection features | Overload |
Noise level | 57.5 dB |
Audible alarm(s) | Yes |
Features | |
Output frequency | 50/60 Hz |
Management protocols | SNMP/HTTP |
Country of origin | China |
Audible alarm modes | Alarm when on battery, Fault, Low battery alarm, Overload alarm |
UPS topology | Line-Interactive |
Waveform | Pure sine |
Automatic Voltage Regulation (AVR) | Yes |
Number of output phases | 1 |
Number of input phases | 1 |
Response time | 4 ms |
Output power | 3000 W |
Input operation voltage (min) | 159 V |
Input operation voltage (max) | 288 V |
Output operation voltage (min) | 220 V |
Output operation voltage (max) | 240 V |
Surge energy rating | 2430 J |
Maximum current | 10 A |
EMI/RFI noise filtering | Yes |
Surge protection | Yes |
Surge protection features | Network |
Emergency Power Off (EPO) | Yes |
Power protection features | Overload |
Power factor | 1 |
Noise level | 57.5 dB |
Audible alarm(s) | Yes |
Output power capacity | 3 kVA |
Power Factor Correction (PFC) type | Active |
Input frequency | 50/60 Hz |
Heat dissipation | 120.8 BTU/h |
Design | |
Country of origin | China |
Rack capacity | 2U |
Form factor | Rackmount/Tower |
LED indicators | Fault, Power, Status |
Product colour | Black |
Cooling type | Active |
Cable length | 2.4 m |
Built-in fan | Yes |
Housing material | Metal |
Control type | Buttons |
Display type | LCD |
Operational conditions | |
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 45 °C |
Operating relative humidity (H-H) | 0 - 95% |
Storage relative humidity (H-H) | 0 - 95% |
Operating altitude | 0 - 3000 m |
Non-operating altitude | 0 - 15000 m |
Technical details | |
Output frequency | 50/60 Hz |
Sustainability compliance | Yes |
Sustainability certificates | ENERGY STAR |
Harmonized System (HS) code | 8504408590 |
Warranty period | 3 year(s) |
Compliance certificates | RoHS |
Certificates | |
---|---|
Compliance certificates | RoHS |
Management features | |
Management protocols | SNMP/HTTP |
Packaging content | |
Cables included | Serial, USB cable |
Rack mount kit | Yes |
Manual | Yes |
Cooling | |
Cooling type | Active |
Built-in fan | Yes |
Sustainability | |
Sustainability compliance | Yes |
Sustainability certificates | ENERGY STAR |
Weight & dimensions | |
Package width | 560 mm |
Package depth | 620 mm |
Package height | 275 mm |
Weight | 32.3 kg |
Width | 433 mm |
Package weight | 40.3 kg |
Height | 86.5 mm |
Depth | 500 mm |
Packaging data | |
Cables included | Serial, USB cable |
Rack mount kit | Yes |
Manual | Yes |
Package width | 560 mm |
Package depth | 620 mm |
Package height | 275 mm |
Package weight | 40.3 kg |
Logistics data | |
Country of origin | China |
Harmonized System (HS) code | 8504408590 |
Warranty period | 3 year(s) |
Other features | |
Battery type | RBP0129 |
You may also be interested in
Product |
![]() Bestseller
APC Smart-UPS X SMX1000I - 1000VA, 8x...
Login for pricing
|
![]() Hot Product
APC Smart-UPS X SMX1500RMI2U - 1500VA,...
Login for pricing
|
![]() New
Eaton 9PX 5000i HotSwap uninterruptibl...
Login for pricing
|
![]() Popular
Eaton 9PX6KIRTN uninterruptible power...
Login for pricing
|
![]() Recommended
Eaton 9SX6KiRT 6 kVA 5400 W 11 AC outl...
Login for pricing
|
---|---|---|---|---|---|
SKU |
SMX1000I
|
SMX1500RMI2U
|
9PX5KIBP
|
9PX6KIRTN
|
9SX6KIRT
|
Description |
Stay always online and prevent data loss
As soon as the power fails, an APC Smart-UPS immediately supplies emergency power to all connected equipment. Because an APC UPS does this automatically, you prevent unwanted failure of, for example, a PC, server or switch. With the free APC PowerChute software, you can even have critical IT hardware shut down automatically and in a controlled manner when the UPS battery is almost empty. This prevents data loss, downtime and physical damage to hardware. Extend the runtime You can easily increase the number of minutes that the APC SMX UPS can independently supply emergency power by connecting external battery packs (SMX48RMBP2U). A runtime of several hours is even possible. Safety In addition, a Smart-UPS protects connected devices against peak voltage caused by lightning, among other things. This APC emergency power supply is ideally suited for (small) business use. Network Management Card If you connect the UPS directly to your network via the optional APC Network Management Card (AP9640/AP9641), it can be easily managed remotely via SNMP or our remote management software Ecostruxure IT Expert (SFTWES1-DIGI). You can also automatically send a shutdown signal via the network to multiple physical and/or virtual servers. By means of the APC PowerChute Network Shutdown Software belonging to the network card, it is even possible to differentiate between the shutdown moment and the order in which this happens. Easy to use This APC Smart-UPS SMX is easy to operate thanks to the LCD screen. Rack/tower convertible The APC Smart-UPS SMX is rack/tower convertible. Because both the feet and the front post rack brackets are included, you can mount it in a rack (2U) or place it upright. If you prefer to mount it on all four rack uprights, order the optional SU032A. Extend the lifespan The internal battery cartridge (APCRBC116) can be replaced easily, safely and independently by the user. This without having to switch off the APC SMX1000I or connected equipment. This allows you to easily and cheaply extend the lifespan of the APC Smart-UPS and your equipment will always remain online. Warranty extension The factory warranty of the SMX1000I is 3 years, with the exception of the battery cartridge, which has a factory warranty of 2 years. Both are extended by 3 years to 6 and 5 years respectively with the APC service pack (WBEXTWAR3YR-SP-02). Switched Outlet Groups: Remote reboot and phased start-up Thanks to the Switched Outlet Groups, it is possible to configure a phased/delayed power-on per UPS outlet group. This reduces the peak load on the UPS and brings it closer to the constant load, which can limit oversizing of the UPS. It is also possible to reset a group of multiple UPS outlets and the equipment connected to them. If a network card (ap9640) is used in combination with Ecostruxure IT Expert (SFTWES1-DIGI), this can even be done remotely. You can also switch off non-critical loads; this extends the runtime for critical equipment. This APC Smart-UPS is designed for IT managers or network administrators to maintain business uptime, data transfer and continuity during prolonged power outages. The 1000VA line interactive 2U rack/tower UPS provides pure sine wave power to support critical electronics during power disruptions. The SMX comes with IEC 320 C14 input, 8x IEC 320 C13 outlets, and 2x IEC jumper cables. The UPS has a SmartSlot for optional Network Management Card that enables graceful shutdown of physical servers, virtual machines & HCI Clusters via PowerChute Network Shutdown. It comes with IEC 320 C14 input, 8x IEC 320 C13 outlets, and 2x IEC jumper cables. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. This uninterrupted power supply can connect to EcoStruxure IT or third-party centralized management platforms. The SMX UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. This is compatible with dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications. The Smart-UPS comes with a pair of tower-mounting stabilizing feet and rack-mounting brackets. The 2 switchable outlet groups allow more granular management of the power supplied to your devices. The Emergency Power Off feature enables the UPS to remotely shutdown during emergencies. |
Always stay online and prevent data loss
As soon as the power fails, an APC Smart-UPS immediately supplies emergency power to all connected equipment. Because an APC UPS does this automatically, you prevent unwanted failure of, for example, a PC, server or switch. With the free APC PowerChute software, you can even have critical IT hardware shut down automatically and in a controlled manner when the UPS battery is almost empty. This prevents data loss, downtime and physical damage to hardware. Extend the runtime You can easily increase the number of minutes that the APC SMX UPS can independently supply emergency power by connecting external battery packs (SMX48RMBP2U). A runtime of several hours is even possible. Safety In addition, a Smart-UPS protects connected devices against peak voltage caused by lightning, among other things. This APC emergency power supply is ideally suited for (small) business use. Network Management Card If you connect the UPS directly to your network via the optional APC Network Management Card (AP9640/AP9641), it can be easily managed remotely via SNMP or our remote management software Ecostruxure IT Expert (SFTWES1-DIGI). You can also automatically send a shutdown signal via the network to multiple physical and/or virtual servers. By means of the APC PowerChute Network Shutdown Software belonging to the network card, it is even possible to differentiate between the shutdown moment and the order in which this happens. Easy to use This APC Smart-UPS SMX is easy to operate thanks to the LCD screen. Rack/tower convertible The APC Smart-UPS SMX is rack/tower convertible. Because both the feet and the 4 post rack mounting brackets are included, you can mount it in a rack (2U) or place it upright. Extend the lifespan The internal battery cartridge (APCRBC115) can be replaced easily, safely and independently by the user. This without having to switch off the APC SMX1500RMI2U or connected equipment. This way you can easily and cheaply extend the lifespan of the APC Smart-UPS and your equipment always stays online. Warranty extension The factory warranty of the SMX1500RMI2U is 3 years, with the exception of the battery cartridge, which has a factory warranty of 2 years. Both are extended by 3 years to 6 and 5 years respectively with the APC service pack (WBEXTWAR3YR-SP-03). Switched Outlet Groups: Remote reboot and phased start-up Thanks to the Switched Outlet Groups it is possible to configure a phased/delayed power-on per UPS outlet group. This reduces the peak load on the UPS and brings it closer to the constant load, which can limit oversizing of the UPS. It is also possible to reset a group of multiple UPS outputs and the equipment connected to them. If a network card (ap9640) is used in combination with Ecostruxure IT Expert (SFTWES1-DIGI), this can even be done remotely. You can also switch off non-critical loads; this extends the runtime for critical equipment. This APC Smart-UPS is designed for IT managers or network administrators to maintain business uptime, data transfer and continuity during prolonged power outages. The 1500VA line interactive 2U rack/tower UPS provides pure sine wave power to support critical electronics during power disruptions. The SMX comes with IEC 320 C14 input, 8x IEC 320 C13 outlets, and 2x IEC jumper cables. The UPS has a SmartSlot for optional Network Management Card that enables graceful shutdown of physical servers, virtual machines & HCI Clusters via PowerChute Network Shutdown. It comes with IEC 320 C14 input, 8x IEC 320 C13 outlets, and 2x IEC jumper cables. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. This uninterrupted power supply can connect to EcoStruxure IT or third-party centralized management platforms. The SMX UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. This is compatible with dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications. The Smart-UPS comes with a pair of tower-mounting stabilizing feet and rack-mounting brackets. The 3 switchable outlet groups allow more granular management of the power supplied to your devices. The Emergency Power Off feature enables the UPS to remotely shutdown during emergencies. |
The Eaton 9PX UPS provides energy-efficient power protection for small & medium Datacentres, IT rooms and Infrastructure. Delivering double conversion protection with 40% less energy usage and 28% more power 9PX is the perfect UPS for IT and Facility managers that are concerned by energy cost and are looking for next generation power protection solutions.
|
The Eaton 9PX UPS provides energy-efficient power protection for small & medium Datacentres, IT rooms and Infrastructure. Delivering double conversion protection with 40% less energy usage and 28% more power 9PX is the perfect UPS for IT and Facility managers that are concerned by energy cost and are looking for next generation power protection solutions.
- Online double conversion topology - Energy efficient (up to 95% in Online mode, 98% in high-efficiency mode, ENERGY STAR® qualified UPS) - Next-generation graphical LCD display (7 languages) - Provides more real power (watts) to protect more equipment with a 0.9 power factor - Parallel operation using HotSync technology (available in Q2 2013) - Maintenance ByPass available as standard (on HotSwap/BP version) - Energy metering - kWh values can be monitored using the LCD or Eaton’s Intelligent Power Software Suite - Compatible with Virtual environments (VMware, Hyper-V, Citrix Xen, Redhat) |
The Eaton 9SX UPS offers high availability, flexibility and advanced protection for infrastructure, industrial, medical, IT, networking, storage and telecom. Delivering on-line double conversion protection in versatile Rack/Tower format with up to 95% efficiency.
|
Short Description |
APC Smart-UPS X SMX1000I - 1000VA, 8x C13 output, USB, expandable runtime
|
Smart-UPS X, Line Interactive, 1500VA, Rack/tower convertible 2U, 230V, 8x C13 IEC, SmartSlot, Extended runtime
|
5000VA, 4500W, 200-240V, 3 x IEC-320-C13, 2 x IEC-320-C19, LCD, 48kg
|
9PX with Network Card and Rack Kit, 6000VA
|
6 kVA, 5.4 kW, LCD, Terminal, 8x C13, 2x C19, USB, RS-232, 45 dB, 48 kg
|
Manufacturer |
APC
|
APC
|
Eaton
|
Eaton
|
Eaton
|