Cisco MA-MNT-MR-17 wireless access point accessory WLAN access point mount

MA-MNT-MR-H2

POE600-K

C9105AXW-KIT=

S4K79A

This wall mounted kit is designed to be used in installations where additional cabling outlets are needed (e.g., telephone cabling) via the same wall plate used by an MR30H access point, and where an aesthetically pleasing solution is needed. The kit contains the front and rear panels of the accessory, two 12mm Philips head screws, and a keystone jack port.

The VigorAP 918RPD and VigorAP 920RPD outdoor access points have a secondary LAN port that provides PoE Output (PoE-PSE), to power an additional PoE device through a single cable run. Use the DrayTek VigorPoE-600 High-Power PoE Injector to power additional devices through the VigorAP 918RPD's secondary LAN port. This powers the VigorAP 918RPD and provides up to 16 watts power output to the device connected to the VigorAP's PoE Out port, over a 100 meter CAT5e/CAT6 cable run. Connect a camera near to the VigorAP, or daisy-chain an additional AP through the one cable.

No

.

Surface Mounting Kit for MR30H

VigorPoE 600 High-Power PoE Injector

Wall-Mount Spacer KIT

Aruba Networking AP-MNT-U Campus Access Point Type U Universal Mount Bracket Kit

Cisco

Draytek

Cisco

HPE